C3-400
Controller Access Control 4 doors
C3-400
Awaiting delivery
Controller Access Control 4 doors
- Number of doors controlled: Four Door
- Number of readers supported: 4
- Types of readers supported: 26-bit Wiegand
- Number of Inputs: 12 (4 Exit Device, 4 Door Status, 4 AUX)
- Number of Outputs: 8 (4- Form C relay for lock and 4- Form C relay for Aux output)
- Card Holders Capacity: 30,000
- Log Events Capacity: 100,000
- Communication: TCP/IP and RS-485
- Recommended Power Supply: 12V DC, 1.5A
- Dimensions ( Board Only): 232mm X 106mm
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC’s. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.