PIO

Awaiting delivery

Input/output Module

Each input/output module has been designed to allow one input to be connected (e.g. contacts) into the system and for one output to be connected (e.g. switching on devices on the perimeter route). The input is double balanced and the output is an open collector type with galvanic separation. The module has its own address and can be connected anywhere to the data cable. For example this PIO module can monitor door opening on the secured route by connecting a magnetic contact. The output may for example switch on the lighting or a sounder remotely. In such case, it is however necessary to provide a local power supply for that device.

• Power supply: from the bus cable of the evaluation unit PVJ
• Consumption: 2mA max.
• Operating temperature range: -55°C ~ +85°C
• Inputs: 1x double balanced (balancing resistances 2×2k2)
• Outputs: 1x open collector type, galvanic separation
• Environmental Protection of Electronics: IP65

• Dimensions: 70 × 80 × 35 mm